1
/
of
2
Spank Spike 800 Vibrocore Alloy Bars
Spank Spike 800 Vibrocore Alloy Bars
- Colour:
- Black - Orange
- Rise:
- 50mm Rise
- Stem Clamp Diameter:
- 31.8mm
- Width:
- 800
Regular price
$179.95
Regular price
$200.00
Sale price
$179.95
Unit price
/
per
Tax included.
SKU:
Couldn't load pickup availability
Spank has taken alloy handlebar tech to the next level with Vibrocore to create a race-tuned and award-winning handlebar design. It all starts with a 6-series alloy that is shaped to perfection with their Dual XGT double butting process. Essentially, this makes the bars thicker for maximum strength where it's needed and reduces the thickness in other areas to save on weight. The bars are then injected with Spank's fancy Vibrocore foam which uses the power of science to greatly reduce the harmful vibrations felt through the bar while also increasing overall bar stiffness and fatigue life.
These are pretty wide bars at 800mm wide but they have handy trim marks to enable you to trim them down to a minimum 740mm width or anything else in-between
Who's this item for: DH, Enduro, and Gravity riders looking to reduce the pain and discomfort that harsh vibrations through the bars can cause.
Material: Dual butted Extreme Gradual Taper (XGT) MGR Super 6 Alloy alloy injected with Vibrocore to take the buzz out of the bars. Shot peen anodised finish for durability.
Width: 800mm of tree clipping width. Can trim up to 30mm off each end to bring them down to 740mm if you'd prefer.
Sweep: 4° Up, 8° Back.
Rise: Available in 30mm or 50mm rise
Markings: Centre alignment, cut marks to trim up to 30mm off each end.
Clamping diameter/bore: 31.8mm
Weight:
Cons: Even though 800mm isn't crazy wide by modern standards, most people will still probably need to trim them down a bit.
These are pretty wide bars at 800mm wide but they have handy trim marks to enable you to trim them down to a minimum 740mm width or anything else in-between
Who's this item for: DH, Enduro, and Gravity riders looking to reduce the pain and discomfort that harsh vibrations through the bars can cause.
Material: Dual butted Extreme Gradual Taper (XGT) MGR Super 6 Alloy alloy injected with Vibrocore to take the buzz out of the bars. Shot peen anodised finish for durability.
Width: 800mm of tree clipping width. Can trim up to 30mm off each end to bring them down to 740mm if you'd prefer.
Sweep: 4° Up, 8° Back.
Rise: Available in 30mm or 50mm rise
Markings: Centre alignment, cut marks to trim up to 30mm off each end.
Clamping diameter/bore: 31.8mm
Weight:
- Approx 350 grams (30mm rise)
- Approx 360 grams (50mm rise)
Cons: Even though 800mm isn't crazy wide by modern standards, most people will still probably need to trim them down a bit.
Share
