V3 - Black

Every tool you need to fix your bike on the trail, all sneakily hidden in plain sight in the hollow of your crank spindle. The V3 models have been tweaked slightly and are now compatible with DUB cranks.

100% designed and handcrafted in Italy, the All In Multitool features 6 customisable tool bit slots and a chain breaker. The tool is locked in place within the hollow of your crank arms with 7 high resistance neodymium magnets. You'll never leave your multitool at home again.

What tools are included?

The tool comes stock with a 3mm, 4mm, 5mm, and 6mm Allen key bits, a t25 torx head, and a #1 Phillips head screwdriver but you are free to customise your loadout with standard bits available from any hardware store.

Is this suitable for my bike?

So long as your crank spindle is 21mm or larger and is steel, then yes! If you're not sure whether your crank spindle is steel or not, remove the cranks from the bike, grab a magnet off the fridge, and see if it'll stick to the spindle.

But is it safely secured?

Most certainly, there are 7 high powered neodymium magnets keeping the tool locked into your crank spindle. The tool has been tested around the world through the Enduro World Series, with no reported failures.

How much does it weigh?

Without bits, the tool itself is 80g. With bits installed, it can come up to a 115g total. Bear in mind that this weight, whilst minimal, is as low as it can go in your bike, which only aids in cornering prowess and overall bike handling.