WCM Fork Top Cap Spanner
Don't round off your top caps with your socket set!
The spanners are specifically designed for short stack height nuts like those on forks. They have no chamfer on them at all, so you'll get maximum purchase on those little nuts. Tolerance of these is a lot tighter than a socket too. Made in the USA from top quality 6061 alloy.
Available in 3 sizes:
24mm and 26mm will fit Fox 32's and most Rockshox 32mm models plus Pike/Lyrik/Yari air side.
26mm and 28mm will fit Fox 32's and 34's plus some Magura and X-fusion models among others.
30mm and 32mm will fit Fox 36 and Fox 40 or anything else that runs a 30 or 32mm nut on the top cap. Will also fit Pike/Lyrik/Yari Charger side.
Ratings & Reviews
by Mark Johnston
I decided to get this instead of a socket set - cheaper & easier to store. Works well on my rock-shox revelation - very pleased.
Does what it's meant to
by Christopher Wong
Does what it's meant to, and does it well. A bit expensive for a piece of aluminium, but you'd be surprised how hard it is to find a non-chamfered socket wrench, and if you're swapping out spacers regularly it's worth the investment. Luckily for me it has both the sizes I need on the one wrench.
Must have !
Excellent quality tool. These spanners are the best option for top cap removal, better than taking a chance with a ground down socket or a open ended spanner etc. Trust me, after you wreck your first top cap you will kick yourself for not getting one of these !
Perfect for fork servicing, very
by Tim -
Perfect for fork servicing, very nicely machined and cheap compared to buying modified sockets. Minimises damage to the forks csu.