USWE Shape Shifter Reusable Bladder
This Shape-Shift hydration system adds a versatile baffle. The baffle can be zipped to slim the bladder profile and unzipped to increase fluid volume or reverse to clean and dry. The patented super-wide slide top opening makes it easy to load up with ice on hot days and turn inside out to clean when your adventure is complete. This product is made by Hydrapak LLC for USWE Sports AB
1,5L (*2,0L unzipped baffle)
2,5L (*3,0L unzipped baffle)
Material: TPU (thermoplastic polyurethane)
Including: 45 degree bite valve, drink tube, Plug-N-Play connector and reusable bladder
Reversible for easy cleaning and drying
Shape-Shift technology provides optional baffle while maintaining reversibility
Constructed with 0.25 mm thick TPU (thermoplastic polyurethane) for superior durability and flexibility
Patented wide slider opening for quick filling and leak proof seal
RF welded seams to create superior bonds at a molecular level
Filtration Compatible (with Plug-N-Play connector) links with in-line water filtration options
Exceeds FDA & EU regulations
No-Leak Product Warranty
The best way to keep your USWE® bladder in top-notch shape is to clean it with soap and water and let it dry completely after every use. Feel free to reach out to our Customer Service team if you have any questions at customerservice[at]uswe-sports.com
The Shape-Shift and Elite bladders are especially easy to clean because they're reversible! They are also dishwasher (top-shelf recommended) friendly. Follow these steps for a carefree reservoir:
SHAPE-SHIFT & ELITE BLADDERS CLEANING
Drain all liquids remaining in the bladder and remove the tube
Place your hand in the bladder, grab the bottom, and pull it back through the top opening (just like turning a sock inside-out). The molded opening can also be flipped after the bladder body has been reversed
Clean the reservoir with mild soap and water or place in the top rack of the dishwasher
Let the bladder dry out completely while reversed
Reverse right side out for storage
TUBE & BITE VALVE CLEANING
Disconnect the drink tube from the reservoir
Grasp the bite valve in one hand and tube in the other. Pull the valve firmly to remove the bite valve from the tube
Gently remove the silicone sheath from the valve and clean with mild soap and water. Rinse thoroughly
Clean the inside of the tube with mild soap and water. Insert the USWE Tube Brush in the open end of the tube and scrub. Rinse thoroughly
After drying the components, carefully reattach sheath to valve and re-install bite valve to tube
WHAT IF MY BLADDER GOT STAINED?
The material used in most our bladders, Thermoplastic Polyurethane (TPU), is chosen for superior durability and flexibility. It is porous and can be stained like fabric. Staining is generally caused by food coloring used in gel or liquids and does not affect the functionality of the product; yet can be difficult to remove. A company called Clean Ethics has engineered a chlorine free, non-toxic, and biodegradable tablet that is safe for virtually any surface, called Bottle Bright. We recommend using this product to combat stains and odors in your USWE® bladder.
WHAT IF MY BLADDER CATCHES TASTE?
Some users may initially notice a plastic-like taste when using any of our products made with TPU. This taste typically subsides over time and can be eliminated by simply squeezing juice from a lemon into the product, filling it with water, and then freezing it. After frozen, remove, thaw, and rinse.
Needed this product quick!
by Nat G
I bought a USWE bite valve ... then saw this product, and had to have it quick! Thanks again to the MTB Direct team.
|USWE Shape Shifter Reusable Bladder||USWERBLDDR|