Stan's NoTubes Tubeless Sealant Injector

8 Reviews
$24.95
Spend over $150 and put it on
 Learn More
For every order placed, we donate a Dollar For Dirt!  Learn More

Description

Add sealant without the mess!  

  • Easily add or transfer sealant from one tyre to another. 
  • Adapter fits Schader and Presta valves.  
  • Includes Schader valve remover.
  • Allows you to add sealant without removing the core.
  • Not compatible with Stans Race Sealant. It's too thick and seals too well so it will block the injector/valve

Out of Stock

You're $99.00 away from Free Regular Shipping!
Free Delivery on orders over $99** Excludes heavy/bulky items
Calculate shipping

Ships from our Melbourne, Australia Warehouse


Reviews

4.4

Does its job

by

Simple device that works as intended.

I would go as far

by -

I would go as far as to say this tool is a MUST HAVE for installing sealant in your tubeless tyres. Without it, trying to pour sealant into the tyre then close over the bead then inflate would be a real pain in the arse. I found this tool works far better as a 'tubeless sealant funnel'. Attach to the valve (core removed), pinch the plastic tubing, remove the plunger and fill the syringe with sealant. Un-pinch the tubing and watch the sealant go straight into the wheel. Virtually no mess using this tool. I also recommend using your pump to properly seat your tyre first, then deflate and install the sealant. Replace the valve core and pump up to desired pressure. Job done! I only use the plunger to flush the syringe with water when the job is done.

Stans NoTubes Tubeless Sealant Injector

by -

It worked well. However, I used as a threaded funnel, of sorts, without the plunger. My son advised me to use it that way and it worked a treat. Seat the tyre, unthread the valve core, thread on the injector, pinch the feed tube and pour in the amount of sealant. Unpinch the tube, in goes the sealant, reinstall the valve core, carefully rotate the wheel to have the valve to the top and inflate. Good to go.

Cheap and crappy

by -

Overpriced cheap syringe with Stan's sticker plastic tube linked in transit and won't straighten plastic screw on valve. Disappointing product from Stan's who are normally good

the sealant injector makes it

by -

the sealant injector makes it a lot easier to add sealant and alot less messy. only a few drops get spilt when removing from valve. Prices was a bit steep for a syringe with a hose. the valve core remover is kind of useless as most mtb valves are presta.

Does the trick

by -

Have used it teice and it certainly makes life easier

Ratings & Reviews

8 reviews

Does its job

by

Simple device that works as intended.

I would go as far

by -

I would go as far as to say this tool is a MUST HAVE for installing sealant in your tubeless tyres. Without it, trying to pour sealant into the tyre then close over the bead then inflate would be a real pain in the arse. I found this tool works far better as a 'tubeless sealant funnel'. Attach to the valve (core removed), pinch the plastic tubing, remove the plunger and fill the syringe with sealant. Un-pinch the tubing and watch the sealant go straight into the wheel. Virtually no mess using this tool. I also recommend using your pump to properly seat your tyre first, then deflate and install the sealant. Replace the valve core and pump up to desired pressure. Job done! I only use the plunger to flush the syringe with water when the job is done.

Stans NoTubes Tubeless Sealant Injector

by -

It worked well. However, I used as a threaded funnel, of sorts, without the plunger. My son advised me to use it that way and it worked a treat. Seat the tyre, unthread the valve core, thread on the injector, pinch the feed tube and pour in the amount of sealant. Unpinch the tube, in goes the sealant, reinstall the valve core, carefully rotate the wheel to have the valve to the top and inflate. Good to go.

Cheap and crappy

by -

Overpriced cheap syringe with Stan's sticker plastic tube linked in transit and won't straighten plastic screw on valve. Disappointing product from Stan's who are normally good

the sealant injector makes it

by -

the sealant injector makes it a lot easier to add sealant and alot less messy. only a few drops get spilt when removing from valve. Prices was a bit steep for a syringe with a hose. the valve core remover is kind of useless as most mtb valves are presta.

Does the trick

by -

Have used it teice and it certainly makes life easier

Specifications

ItemBarcode
Stan's NoTubes Tubeless Sealant Injector183720000151

Blog View all

Basic Bike Maintenance

The idea of working on your bike can be a little daunting for new riders but a bit of regular maintenance performed before each ride will make your bike time more enjoyable and keep your steed perform...

Read More  

New to Mountain Biking? Start Here

New to mountain biking? Welcome to the party! You'll be sure to encounter a tonne of unfamiliar terms and technical jargon as you get more into it so we've collected some of our most useful blog ar...

Read More  

How To Use RockShox Trailhead

RockShox Trailhead is an easy to use tool that will help you to select the correct parts for RockShox forks and some later model shocks. The app can assist with looking up service kits, manuals, air ...

Read More