OneUp Components EDC Stem Cap and Preload Kit
Already have the OneUp Components EDC Stem and wand to run the EDC Tool in your fork? This is the stem cap and preload kit you need.
This kit uses a unique, conical spacer and collar tighten down your headset, so you will need to remove your star nut.
The kit also includes proprietary steerer tube spacers that go ABOVE the stem only. They clip onto the stem and into each other to cover the distance from the stem to the top of your steerer tube. The cap then goes over that to hold your EDC Tool in your steerer tube.
The kit is only for use with the OneUp EDC Stem. It does NOT work with any other stem.
In the box:
- Preload collar
- 1x preload collar bolt, M3
- 1x preload collar lock nut
- Preload conical spacer
- 2x 5mm EDC spacers
- 2x 10mm EDC spacers
- EDC top cap
Please bear in mind, installation is a complex process. Detailed instructions are available below, please pay very close attention to this.