Ohlins RXF36 EVO Coil Fork
The RXF36 EVO Coil is a hard-hitting single crown fork from Ohlins, the renowned Swedish suspension gods. This fork builds on the success of the original RXF36 with the EVO upgrade providing improved small bump performance and increased sensitivity.
The proven TTX (twin-tube design) damper remains, allowing the fork to stay high in its travel and providing confidence-inspiring support through large repetitive hits. Everything is brought together by a unique forged crown for optimised stiffness and tyre control with less chassis flex.
Swedish gold is guaranteed to turn heads wherever you ride!
The EVO upgrades over the standard RXF 36 Air are:
- SKF seals for better performance in wet conditions and improved longevity
- Reworked piston for reduced breakaway force and more controlled pressure build-up at higher shaft speeds
- Adjusted bushing play to Enduro race team preferences
Who is this for: Any riders who want a hard-charging coil fork for technical Enduro and trail riding.
Spring type: This is a coil spring fork, providing excellent traction and small bump compliance. 7 Different coil rates ensure you'll be able to use the correct spring to suit your weight and riding style.
Wheel size compatibility: 27.5"
- 27.5: 46mm offset
Max tyre width: 2.8"
Suspension travel amount:
- 150mm, 160mm
Damper technology: Twin-tube Technology (TTX): allows continuous parallel and separate flow of oil to maintain consistent internal pressures. This results in a fork that has excellent stability characteristics, off the top sensitivity, and rides high in its travel.
- External rebound: 15 clicks
- Low-speed compression: 15 clicks
- High-speed compression: 5 clicks with pedal mode
Travel adjustability: There aren't any external controls to adjust the travel, however, you can make this change internally if you wish.
Volume adjustability: The air spring offers a separate self-equalising negative chamber as well as an extra ramp up chamber which you can add air to for adjusting the spring curve at the end of the travel (similar to adding or removing tokens in many other forks).
Stanchion diameter: 36mm.
Axle size and style: 15x110mm axle (boost)
Steerer tube standard: Standard 1.5 - 1 1⁄8" external tapered steerer.
Brake mount style: Post Mount 180mm
Brake Rotor Compatibility:
- Minimum rotor size: 180mm
- Maximum rotor size: 203mm
|Black - 27.5 Inch - 150mm - 15x110mm Boost - Bolt Up - 46mm - Tapered 1 1-8-1.5 Inch - Coil - TTX||FG3615_1970|
|Black - 27.5 Inch - 160mm - 15x110mm Boost - Bolt Up - 46mm - Tapered 1 1-8-1.5 Inch - Coil - TTX||FG3616_1970|