{"title":"Ride Mechanic Chain Lubes","description":null,"products":[{"product_id":"ride-mechanic-bike-syrup-wet-lubricant-60ml","title":"Ride Mechanic Bike Syrup Wet Lubricant - 60ml","description":"\u003cp\u003eBike Syrup is a long-lasting wet film chain lubricant that contains a cushioning additive that coats the metal surfaces inside the links to provide exceptionally quiet drivetrain performance.\u003c\/p\u003e\u003cp\u003eBike Syrup lubricant formulation was designed to last long distances and make the drivetrain run quietly while providing an external coating that does not attract road grime. It is a viscous consistency and applied sparingly one drop on every 3-6 rollers. The Syrup then slowly penetrates deep into the links to leave a tenacious coating that protects the inside and outside surfaces of the chain. This means the chain runs smooth and quiet over long-distance road riding conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEnables a very quiet drivetrain – stealth mode.\u003c\/li\u003e\n\u003cli\u003eIncorporates cushioning extreme pressure additives which coat the metal surfaces reducing metal-metal wear.\u003c\/li\u003e\n\u003cli\u003eLeaves a protective fluid coating on the inside and outside surfaces of the chain rollers, pins and plates.\u003c\/li\u003e\n\u003cli\u003eUse a small amount – one drop on every 3-6 rollers.\u003c\/li\u003e\n\u003cli\u003eLong-lasting – up to 1000km or several weeks.\u003c\/li\u003e\n\u003cli\u003ePreferred by long-distance road and commuter cyclists.\u003c\/li\u003e\n\u003cli\u003eNon-hazardous for easier transport and storage.\u003c\/li\u003e\n\u003cli\u003eProudly developed and manufactured in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections For Use:\u003c\/strong\u003e\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eThoroughly degrease and dry sprockets, chainring and chain for best results.\u003c\/li\u003e\n\u003cli\u003eAdjust chain into a commonly used gear ratio.\u003c\/li\u003e\n\u003cli\u003eLocate the joining link as a start point then apply one drop of Bike Syrup on top of every 3 rollers.\u003c\/li\u003e\n\u003cli\u003eSlowly rotate the crank backwards for around 20-30 revolutions.\u003c\/li\u003e\n\u003cli\u003eIn cold weather or if Syrup seems too thick to penetrate effectively then direct a hot air stream on the rotating chain to assist flow.\u003c\/li\u003e\n\u003cli\u003eAllow to stand for 10 minutes to assist lube penetration.\u003c\/li\u003e\n\u003cli\u003eRide in silence.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eA full degrease is best for the initial Bike Syrup application to assist the lubricant to penetrate more effectively into the links.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003eThe Bike Syrup forms a protective water-repellent fluid coating on both the inner and outer surfaces of the drivetrain. If the gaps inside the chain (between rollers, pins and plates) are packed with the tenacious lubricant it will help prevent dirt and water from wicking into the gaps and increasing friction and wear.\u003c\/p\u003e\u003cp\u003eAfter a wet ride remember to ensure the bike is thoroughly dried, cleaned and lubed to protect against corrosion.\u003c\/p\u003e\u003cp\u003eFor dry riding conditions, it is recommended to wipe the surface of the chain with a clean rag prior to riding. The chain will look clean on the outside and is less attractive to dust with the lube remaining active on the internal surfaces.\u003c\/p\u003e\u003cp\u003eRegular lubrication and wiping the external surfaces of a chain with Bike Syrup will vastly improve drivetrain performance and protection. Without lubricant, or if the drivetrain is covered in dirt particles and corrosive contaminants, the result will be excessive drivetrain noise and wear.\u003c\/p\u003e","brand":"Ride Mechanic","offers":[{"title":"Default Title","offer_id":40691050840109,"sku":"10018672","price":18.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/Ride_Mechanic_Bike_Syrup_Wet_Lubricant_main_01_6dd1eb74-fbe8-420e-9596-dfc8a42ea799.jpg?v=1655167053"},{"product_id":"ride-mechanic-bike-milk-dry-lubricant-50ml","title":"Ride Mechanic Bike Milk Dry Lubricant - 50ml","description":"\u003cp\u003eBike Milk is a dry film chain lube with an advanced triple action formula that cleans, lubes, and protects your drivetrain, providing clean and quiet operation in both wet and dry conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent penetrating-cleaning-degreasing properties to remove grime buildup and assist lube flow throughout moving chain parts.\u003c\/li\u003e\n\u003cli\u003eThe dry film coating keeps the chain exceptionally clean without attracting dust onto the drivetrain surfaces.\u003c\/li\u003e\n\u003cli\u003eNo wet residue buildup which can rub off to leave dark stains.\u003c\/li\u003e\n\u003cli\u003eLeaves a protective film on the crucially important internal contact surfaces of the chain between rollers, bushings, pins and plates.\u003c\/li\u003e\n\u003cli\u003eEmploys a reservoir effect to deliver lube into moving parts as you ride.\u003c\/li\u003e\n\u003cli\u003eThe perfect drivetrain lubricant for shorter (up to 3h) and dry dusty rides or in beach\/sand conditions.\u003c\/li\u003e\n\u003cli\u003eProudly developed and manufactured in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections For Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 1: \u003c\/strong\u003ecleaning chain\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eDegrease chain thoroughly before initial application.\u003c\/li\u003e\n\u003cli\u003eAdjust chain onto the smallest rear sprocket.\u003c\/li\u003e\n\u003cli\u003eShake the bottle vigorously to re-suspend and disperse the active components.\u003c\/li\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Milk onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, clean and flush contaminants from deep inside the chain.\u003c\/li\u003e\n\u003cli\u003eAfter 20 seconds, thoroughly wipe the residue off the chain using a dry cloth. This is important because the Bike Milk will dissolve and flush the grease and dirt from the chain and carry it to the outer surfaces. If this isn't removed it will work its way back inside the chain.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eIn some cases, this cleaning process may need to be repeated several times.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eA full degrease is best on a routine basis or the first time Bike Milk is used on the chain. Failure to effectively degrease, clean and dry the chain prior to applying Bike Milk will compromise the bonding of the dry film lubricant onto the metal surface.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 2: \u003c\/strong\u003eLubricate and protect\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Milk onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, flush and coat moving surfaces of the chain.\u003c\/li\u003e\n\u003cli\u003eAllow the Bike Milk to dry on all of the metal surfaces of the chain to form a protective lubricating film. Leaving overnight is recommended. \u003cspan style=\"text-decoration: underline;\"\u003eIn very cold (freezing) conditions Bike Milk does not evaporate as fast and needs a longer time to bond to the chain.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeat this apply\/dry lube process several times if the chain has been fully degreased or a thicker film is required for endurance rides.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eFor dry riding conditions, it is best to wipe residue from the surface of the chain with a clean rag prior to riding. The chain will look clean on the outside and is less attractive to dust. The lube remains active on the internal surfaces where it's needed.\u003c\/p\u003e\u003cp\u003eFor normal conditions, the lube should be left to dry to create a protective water-repellant coating on the inner surfaces of the chain.\u003c\/p\u003e","brand":"Ride Mechanic","offers":[{"title":"Default Title","offer_id":40691050774573,"sku":"10018670","price":8.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/Ride_Mechanic_Bike_Milk_Dry_Lubricant_main_01_268300aa-bd9a-425d-a68f-a527f9513953.jpg?v=1654587777"},{"product_id":"ride-mechanic-bike-mix-all-purpose-lubricant-50ml","title":"Ride Mechanic Bike Mix All Purpose Lubricant - 50ml","description":"\u003cp\u003eRide Mechanic Bike Mix is an All-Purpose chain lubricant that combines the desirable features of both wet (durable) and dry (clean) lubricants. It is dry enough to not attract dust and grime buildup but it is also wet enough to last for at least 12h in dry and dusty off-road conditions.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBike Mix is the ultimate mountain bike lube for several reasons:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt has excellent penetrating-cleaning-degreasing properties to remove grime buildup and assist lube flow throughout moving chain parts.\u003c\/li\u003e\n\u003cli\u003eThe chain stays clean without large quantities of greasy, sticky, wet residue to attract dust onto the drivetrain surfaces. \u003c\/li\u003e\n\u003cli\u003eIt leaves a protective film on the crucially important internal contact surfaces of the chain between rollers, bushings, pins and plates.\u003c\/li\u003e\n\u003cli\u003eEmploys a reservoir effect to deliver lube into moving parts as you ride.\u003c\/li\u003e\n\u003cli\u003ePerfect drivetrain lubricant for long dusty rides or bike touring.\u003c\/li\u003e\n\u003cli\u003eProudly developed and manufactured in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections For Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 1: \u003c\/strong\u003ecleaning chain\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eDegrease chain thoroughly before initial application.\u003c\/li\u003e\n\u003cli\u003eAdjust chain onto the smallest rear sprocket.\u003c\/li\u003e\n\u003cli\u003eShake the bottle vigorously to re-suspend and disperse the active components.\u003c\/li\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Mix onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, clean and flush contaminants from deep inside the chain.\u003c\/li\u003e\n\u003cli\u003eAfter 20 seconds, thoroughly wipe the residue off the chain using a dry cloth. This is important because the Bike Mix will dissolve and flush the grease and dirt from the chain and carry it to the outer surfaces. If this isn't removed it will work its way back inside the chain.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eFor a very dirty or wet chain that has been gummed up with other lubricants or washed with water then this cleaning process may need to be repeated several times. \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eA full degrease is best on a routine basis or the first time Bike Milk is used on the chain. Failure to effectively degrease, clean and dry the chain prior to applying Bike Milk will compromise the bonding of the dry film lubricant onto the metal surface.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 2: \u003c\/strong\u003eLubricate and protect\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Mix onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, flush and coat moving surfaces of the chain.\u003c\/li\u003e\n\u003cli\u003eAllow the Bike Mix to dry on all of the metal surfaces of the chain to form a protective lubricating film. Leaving overnight is recommended. \u003cspan style=\"text-decoration: underline;\"\u003eIn very cold (freezing) conditions Bike Milk does not evaporate as fast and needs a longer time to bond to the chain.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeat this apply\/dry lube process several times if the chain has been fully degreased or a thicker film is required for endurance rides.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eIt is best to wipe residue from the surface of the chain with a clean rag prior to riding. The chain will look clean on the outside and is less attractive to dust. The lube remains active on the internal surfaces where it's needed.\u003c\/p\u003e\u003cp\u003eFailure to wipe down the outer surface before riding may lead to a build-up of lubricant on the jockey wheels.  The lube is best used by pre-application and coating but can be used immediately pre-ride. \u003c\/p\u003e\u003cp\u003eAfter a wet ride, it is very important to ensure the whole bike and in particular, the drivetrain is thoroughly dried and re-lubricated soon after being wet. \u003c\/p\u003e","brand":"Ride Mechanic","offers":[{"title":"Default Title","offer_id":40691051135021,"sku":"10018671","price":11.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/Ride_Mechanic_Bike_Mix_All_Purpose_Lubricant_main_01_c9aff29f-a46b-4591-acb4-447c8fa70f7f.jpg?v=1654587756"},{"product_id":"ride-mechanic-bike-mix-all-purpose-lubricant-185ml","title":"Ride Mechanic Bike Mix All Purpose Lubricant - 185ml","description":"\u003cp\u003eRide Mechanic Bike Mix is an All-Purpose chain lubricant that combines the desirable features of both wet (durable) and dry (clean) lubricants. It is dry enough to not attract dust and grime buildup but it is also wet enough to last for at least 12h in dry and dusty off-road conditions.  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBike Mix is the ultimate mountain bike lube for several reasons:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIt has excellent penetrating-cleaning-degreasing properties to remove grime buildup and assist lube flow throughout moving chain parts.\u003c\/li\u003e\n\u003cli\u003eThe chain stays clean without large quantities of greasy, sticky, wet residue to attract dust onto the drivetrain surfaces. \u003c\/li\u003e\n\u003cli\u003eIt leaves a protective film on the crucially important internal contact surfaces of the chain between rollers, bushings, pins and plates.\u003c\/li\u003e\n\u003cli\u003eEmploys a reservoir effect to deliver lube into moving parts as you ride.\u003c\/li\u003e\n\u003cli\u003ePerfect drivetrain lubricant for long dusty rides or bike touring.\u003c\/li\u003e\n\u003cli\u003eProudly developed and manufactured in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections For Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 1: \u003c\/strong\u003ecleaning chain\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eDegrease chain thoroughly before initial application.\u003c\/li\u003e\n\u003cli\u003eAdjust chain onto the smallest rear sprocket.\u003c\/li\u003e\n\u003cli\u003eShake the bottle vigorously to re-suspend and disperse the active components.\u003c\/li\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Mix onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, clean and flush contaminants from deep inside the chain.\u003c\/li\u003e\n\u003cli\u003eAfter 20 seconds, thoroughly wipe the residue off the chain using a dry cloth. This is important because the Bike Mix will dissolve and flush the grease and dirt from the chain and carry it to the outer surfaces. If this isn't removed it will work its way back inside the chain.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eFor a very dirty or wet chain that has been gummed up with other lubricants or washed with water then this cleaning process may need to be repeated several times. \u003c\/p\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eA full degrease is best on a routine basis or the first time Bike Milk is used on the chain. Failure to effectively degrease, clean and dry the chain prior to applying Bike Milk will compromise the bonding of the dry film lubricant onto the metal surface.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 2: \u003c\/strong\u003eLubricate and protect\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Mix onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, flush and coat moving surfaces of the chain.\u003c\/li\u003e\n\u003cli\u003eAllow the Bike Mix to dry on all of the metal surfaces of the chain to form a protective lubricating film. Leaving overnight is recommended. \u003cspan style=\"text-decoration: underline;\"\u003eIn very cold (freezing) conditions Bike Milk does not evaporate as fast and needs a longer time to bond to the chain.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeat this apply\/dry lube process several times if the chain has been fully degreased or a thicker film is required for endurance rides.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eIt is best to wipe residue from the surface of the chain with a clean rag prior to riding. The chain will look clean on the outside and is less attractive to dust. The lube remains active on the internal surfaces where it's needed.\u003c\/p\u003e\u003cp\u003eFailure to wipe down the outer surface before riding may lead to a build-up of lubricant on the jockey wheels.  The lube is best used by pre-application and coating but can be used immediately pre-ride. \u003c\/p\u003e\u003cp\u003eAfter a wet ride, it is very important to ensure the whole bike and in particular, the drivetrain is thoroughly dried and re-lubricated soon after being wet. \u003c\/p\u003e","brand":"Ride Mechanic","offers":[{"title":"Default Title","offer_id":40691051036717,"sku":"10018680","price":14.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/Ride_Mechanic_Bike_Mix_All_Purpose_Lubricant_main_01_576679b5-49f5-4d7e-8383-0fd7fc530191.jpg?v=1654587755"},{"product_id":"ride-mechanic-bike-milk-dry-lubricant-185ml","title":"Ride Mechanic Bike Milk Dry Lubricant - 185ml","description":"\u003cp\u003eBike Milk is a dry film chain lube with an advanced triple action formula that cleans, lubes, and protects your drivetrain, providing clean and quiet operation in both wet and dry conditions.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eExcellent penetrating-cleaning-degreasing properties to remove grime buildup and assist lube flow throughout moving chain parts.\u003c\/li\u003e\n\u003cli\u003eThe dry film coating keeps the chain exceptionally clean without attracting dust onto the drivetrain surfaces.\u003c\/li\u003e\n\u003cli\u003eNo wet residue buildup which can rub off to leave dark stains.\u003c\/li\u003e\n\u003cli\u003eLeaves a protective film on the crucially important internal contact surfaces of the chain between rollers, bushings, pins and plates.\u003c\/li\u003e\n\u003cli\u003eEmploys a reservoir effect to deliver lube into moving parts as you ride.\u003c\/li\u003e\n\u003cli\u003eThe perfect drivetrain lubricant for shorter (up to 3h) and dry dusty rides or in beach\/sand conditions.\u003c\/li\u003e\n\u003cli\u003eProudly developed and manufactured in Australia.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eDirections For Use:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 1: \u003c\/strong\u003ecleaning chain\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eDegrease chain thoroughly before initial application.\u003c\/li\u003e\n\u003cli\u003eAdjust chain onto the smallest rear sprocket.\u003c\/li\u003e\n\u003cli\u003eShake the bottle vigorously to re-suspend and disperse the active components.\u003c\/li\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Milk onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, clean and flush contaminants from deep inside the chain.\u003c\/li\u003e\n\u003cli\u003eAfter 20 seconds, thoroughly wipe the residue off the chain using a dry cloth. This is important because the Bike Milk will dissolve and flush the grease and dirt from the chain and carry it to the outer surfaces. If this isn't removed it will work its way back inside the chain.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eIn some cases, this cleaning process may need to be repeated several times.\u003c\/p\u003e\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eA full degrease is best on a routine basis or the first time Bike Milk is used on the chain. Failure to effectively degrease, clean and dry the chain prior to applying Bike Milk will compromise the bonding of the dry film lubricant onto the metal surface.\u003c\/span\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStage 2: \u003c\/strong\u003eLubricate and protect\u003c\/p\u003e\u003col\u003e\n\u003cli\u003eRotate the chain backwards and direct a soaking stream of Bike Milk onto the chain. The chain should be visibly coated and look wet.\u003c\/li\u003e\n\u003cli\u003eContinue rotating to allow the product to penetrate, flush and coat moving surfaces of the chain.\u003c\/li\u003e\n\u003cli\u003eAllow the Bike Milk to dry on all of the metal surfaces of the chain to form a protective lubricating film. Leaving overnight is recommended. \u003cspan style=\"text-decoration: underline;\"\u003eIn very cold (freezing) conditions Bike Milk does not evaporate as fast and needs a longer time to bond to the chain.\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eRepeat this apply\/dry lube process several times if the chain has been fully degreased or a thicker film is required for endurance rides.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003eFor dry riding conditions, it is best to wipe residue from the surface of the chain with a clean rag prior to riding. The chain will look clean on the outside and is less attractive to dust. The lube remains active on the internal surfaces where it's needed.\u003c\/p\u003e\u003cp\u003eFor normal conditions, the lube should be left to dry to create a protective water-repellant coating on the inner surfaces of the chain.\u003c\/p\u003e","brand":"Ride Mechanic","offers":[{"title":"Default Title","offer_id":40691051298861,"sku":"10018679","price":17.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/files\/Ride_Mechanic_Bike_Milk_Dry_Lubricant_main_01_3d791d78-7a74-4f0b-ae77-6c2a4df837ac.jpg?v=1683767923"}],"url":"https:\/\/www.mtbdirect.com.au\/collections\/ride-mechanic-chain-lubes.oembed","provider":"MTB Direct Australia","version":"1.0","type":"link"}