{"title":"OneUp Components Bike Mounted Multi Tools","description":null,"products":[{"product_id":"oneup-components-edc-lite-every-day-carry-tool-blue","title":"OneUp Components EDC Lite Every Day Carry Tool - Blue","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684602523693,"sku":"10009720","price":59.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Blue_01.jpg?v=1654852289"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-green","title":"OneUp Components EDC Lite Every Day Carry Tool - Green","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684602654765,"sku":"10009721","price":35.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Green_01.jpg?v=1654852292"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-orange","title":"OneUp Components EDC Lite Every Day Carry Tool - Orange","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684602818605,"sku":"10009722","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Orange_01.jpg?v=1654852297"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-black","title":"OneUp Components EDC Lite Every Day Carry Tool - Black","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684603113517,"sku":"10009719","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Black_01_9ed6e4df-6bff-458a-a0a8-11f077a0df6f.jpg?v=1654852305"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-turquoise","title":"OneUp Components EDC Lite Every Day Carry Tool - Turquoise","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684603539501,"sku":"10009725","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Turquoise_01.jpg?v=1654852311"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-red","title":"OneUp Components EDC Lite Every Day Carry Tool - Red","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684603703341,"sku":"10009724","price":59.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Red_01.jpg?v=1654852317"},{"product_id":"oneup-components-edc-lite-every-day-carry-tool-purple","title":"OneUp Components EDC Lite Every Day Carry Tool - Purple","description":"\u003cp\u003eNever get stuck without a tool on a ride again!\u003c\/p\u003e\u003cp\u003eThe EDC Lite is a stripped-back version of the full EDC tool containing a multi-tool with the 9 tools you're most likely to need for trailside tweaks and repairs. The tool is designed to live neatly inside your stem\/steerer tube so you'll always have a tool on hand when you need it. You can even share the same multi-tool between all your bikes by installing a carrier in each one.\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSee the link to the complete installation instructions \u003c\/b\u003e\u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSpecs:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eIncludes 2, 2.5, 3, 4, 5, 6, 8mm Hex, T25 Torx and a Flat Head Screwdriver.\u003c\/li\u003e\n\u003cli\u003eWeight: 89g (adds just 75g to your bike)\u003c\/li\u003e\n\u003cli\u003eAvailable in 6 colours:(Black, Red, Blue, Green, Orange, Purple, Turquoise).\u003c\/li\u003e\n\u003cli\u003eColour-matched to OneUp composite pedals, grips, chain guides and handlebar decals.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eEnsure your fork is compatible - Very Important!\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003e\u003cb\u003eIncompatible forks:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cp data-pm-slice=\"1 1 []\"\u003eFox's E-Optimized forks - incompatible due to thicker steerer tube material.\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eSteerer tube inner diameter:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eSteerer tube length:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003cbr\u003e\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40684603965485,"sku":"10009723","price":41.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Every_Day_Carry_Tool_Purple_01.jpg?v=1654852318"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-purple","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Purple","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089211437,"sku":"10019661","price":11.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Purple_01.jpg?v=1653596302"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-blue","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Blue","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089539117,"sku":"10019658","price":29.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Blue_01.jpg?v=1653596300"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-black","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Black","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089309741,"sku":"10019657","price":29.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Black_01.jpg?v=1653596298"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-orange","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Orange","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089408045,"sku":"10019660","price":11.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Orange_01.jpg?v=1653596302"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-red","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Red","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089637421,"sku":"10019662","price":11.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Red_01.jpg?v=1653596305"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-green","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Green","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089735725,"sku":"10019659","price":11.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Green_01.jpg?v=1653596302"},{"product_id":"oneup-components-edc-lite-plastics-kit-no-tool-turquoise","title":"OneUp Components EDC Lite Plastics Kit - No Tool - Turquoise","description":"\u003cp\u003eThe EDC Lite plastics replacement kit allows you to carry the EDC Lite multi-tool in a second bike or to replace parts from the original kit that have been lost or damaged.\u003c\/p\u003e\u003cp\u003eYou could also just grab a new kit to switch up the colour scheme on your bike if you like!\u003c\/p\u003e\u003cp\u003eThe EDC lite is compatible with any bike with a star nut (provided the steerer tube is the right length). Installation is very easy and can be performed in 5 minutes or less, without the need to remove the star nut or thread your steerer tube.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSee the link to the complete installation instructions\u003c\/strong\u003e \u003ca href=\"https:\/\/can.oneupcomponents.com\/pages\/edc-lite-install-instructions\" target=\"_blank\" rel=\"noopener\"\u003eHERE\u003c\/a\u003e (be sure to give it a good read through before you begin!)\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecs: \u003c\/strong\u003eThe kit Contains.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e1x Inner Carrier (available in various colours)\u003c\/li\u003e\n\u003cli\u003e1x Outer Carrier (black)\u003c\/li\u003e\n\u003cli\u003e1x Flat-Head Bolt, M6x30\u003c\/li\u003e\n\u003cli\u003e1x Socket-Head Bolt, M6x85 (installation)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eDoes not include the EDC tool.\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eEnsure your fork is compatible - Very Important!\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIncompatible forks:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eGiant Overdrive 2\u003c\/li\u003e\n\u003cli\u003eCannondale Lefty\u003c\/li\u003e\n\u003cli\u003eAnything with a carbon steerer\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube inner diameter:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inner diameter of your steerer tube must be at least 24.1mm. OneUp is not currently aware of any tapered steerer tubes that do not meet this requirement. If unsure, you can check this by inserting the tip of the EDC Lite into the steerer tube above the star nut BEFORE lowering the star nut position.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSteerer tube length:\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMost forks are compatible, except for a small number of forks with very short steerer tubes. For the following cases, your fork steerer tube length must meet the minimum length requirement.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eFox (not incl Fox 38): 190mm minimum\u003c\/li\u003e\n\u003cli\u003eFox 38: 210mm minimum\u003c\/li\u003e\n\u003cli\u003eRockShox Forks: 210mm minimum\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eMeasure from the underside of your fork crown to the top of your spacer stack, or top of your stem if you are not running any spacers above your stem.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":40691089670189,"sku":"10019663","price":29.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Lite_Plastics_Kit_No_Tool_Turquoise_01.jpg?v=1653596307"},{"product_id":"oneup-components-edc-multi-tool-tool-only-1","title":"OneUp Components EDC Multi Tool - Tool Only","description":"\u003cp\u003eOneUp tools need no introduction in the MTB scene. Taking the world by storm with their EDC tool system, Oneup created the most convenient, function, lightweight and fun tool that you'll want to pull out for your friends.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWho's this item for:\u003c\/strong\u003e Whether you lost the multitool for the EDC or you're looking for a lightweight and feature-packed multitool, this is the tool for you.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eHow many tools: \u003c\/strong\u003e10 Tools.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhat does it include:\u003c\/strong\u003e 2, 2.5, 3, 4, 5, 6, 8mm Hex T25 Torx, Flathead screwdriver, EDC Top Cap Tool.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSize: \u003c\/strong\u003eVery small, no wider than your steerer tube and no longer than your fingers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWeight: \u003c\/strong\u003e58g.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":41113459753005,"sku":"10016771","price":49.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Multi_Tool_Tool_Only_01_525a8be6-deb7-471f-80c1-bf2b0eb8e3a6.jpg?v=1662678299"},{"product_id":"oneup-components-edc-multi-tool-v2-black-1","title":"OneUp Components EDC Multi Tool V2 - Black","description":"\u003cp\u003eAll your trailside tools, always on your bike and instantly accessible\u003c\/p\u003e\u003cp\u003eThe EDC (Everyday Carry) tool contains all your essential trailside tools and can be conveniently stored inside your steerer tube\/stem or the EDC Pump for quick and easy access. Add the optional Tubeless Plug Kit to your EDC tool to fix punctures fast.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eStorage Options:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eStandard installation requires the fork steerer to be threaded with the \u003ca href=\"\/oneup-components-edc-every-day-carry-tap-kit\" target=\"_self\"\u003eEDC Every Day Carry Tap Kit\u003c\/a\u003e and installed with the the \u003ca href=\"\/oneup-components-edc-every-day-carry-top-cap\" target=\"_self\"\u003eEDC Every Day Carry Top Cap\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eA \u003ca href=\"\/oneup-components-edc-threadless-carrier\" target=\"_self\"\u003eThreadless Carrier \u003c\/a\u003eis also available if you don't want to tap a thread into your fork steerer.\u003c\/li\u003e\n\u003cli\u003eYou can also store the tool in the \u003ca href=\"\/oneup-components-edc-every-day-carry-pump\" target=\"self\"\u003eEDC Pump\u003c\/a\u003e if you'd prefer not to store it in your stem.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhether you're going out for a quick lunch ride or setting off on a longer adventure, EDC has all the tools that you need to keep your bike running smoothly and fix any trailside mechanical.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eNew for 2020 (V2 Tools):\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eEasier to remove from your bike, with a lower friction design.\u003c\/li\u003e\n\u003cli\u003eUpdated Chain Breaker is easier to use and has a steel body for increased durability\u003c\/li\u003e\n\u003cli\u003eStronger steel Spoke Keys\u003c\/li\u003e\n\u003cli\u003eBlack Multi-Tool\u003c\/li\u003e\n\u003cli\u003eTubeless plug jabber cover (Small storage capsule)\u003c\/li\u003e\n\u003cli\u003eTool Features (20 functions, 130g)\u003c\/li\u003e\n\u003cli\u003eIncludes a 10 function Multi-Tool, Tyre Lever and Chain Breaker.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eMulti-Tool Features:\u003c\/b\u003e (10 functions, 58g)\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e2, 2.5, 3, 4, 5, 6, 8mm, T25 Torx. Flat Head Screwdriver. EDC Top Cap Tool\u003c\/li\u003e\n\u003cli\u003eThe EDC Tool contains no loose, easy to lose driver bits\u003c\/li\u003e\n\u003cli\u003eUltra-compact and super lightweight\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eTyre Lever\/Chain Breaker Features:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\u003cli\u003eTyre Lever, Chain Breaker, 0,1,2,3 Spoke Keys, Presta Valve Core Tool, Spare Rotor Bolt\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eCarrier Features:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSpare Quick Link Storage\u003c\/li\u003e\n\u003cli\u003e12,16, 20g CO2 Cartridge Storage or 2 x Sealed Storage Capsules\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eStorage Capsule: \u003c\/b\u003eThe V2 EDC tool now comes with a small and a large sealed storage capsule.\u003c\/p\u003e\u003cp\u003eThe new small capsule is used to cover your jabber and preloaded bacon strip keeping it sticky for longer. The small capsule can be used with EDC Threaded options. It also allows you to use the EDC tool and tubeless plug kit inside the small 70cc OneUp pump. The large capsule only fits inside an EDC Threaded setup, EDC Stem or 100cc pump. The small capsule can be installed inside the large capsule for separating items.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eStorage Capsule Suggested Pack List:\u003c\/b\u003e (not included): Cash ($20 Note), Zip ties, Park TB-2 Emergency Tire Boot, Waterproof matches, Glueless patches.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eEDC Tool Storage Options: \u003c\/b\u003eThe EDC Tool was designed to be stored inside your stem\/steerer tube or inside the high volume, CNC Aluminium, EDC Pump with integrated CO2 inflator head. Grabbing your EDC tool from the pump is as easy as reaching for your water bottle.\u003c\/p\u003e\u003cp\u003e\u003cb\u003eCompatibility:\u003c\/b\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBackwards compatible with all V1 EDC Tool storage options\u003c\/li\u003e\n\u003cli\u003eIncludes special star-shaped washer to prevent rattling when used with Fox 38's (which have an internally ovalised steerer)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cb\u003eStory:\u003c\/b\u003e\u003c\/p\u003e\u003cp\u003eWe always prefer to ride without a backpack, whenever possible in Squamish. But no one wants to be 'that guy' who needs to borrow tools when out on a ride, or has to hike down the trail with a broken bike. We wanted a solution that would allow us to carry the essential tools that we need for every ride, without wearing a bulky backpack, which is why we created the EDC tool system.\u003c\/p\u003e\u003cp\u003eFor rides under 3 hours, OneUp recommends storing your EDC Tool in your steerer tube, with the Tubeless Plug Kit installed and already loaded with Bacon in case you get a flat.\u003c\/p\u003e\u003cp\u003eBy attaching your complete tool system to your bike you can be sure to never forget your repair kit.\u003c\/p\u003e\u003cp\u003eWe carry the 70cc pump mounted to our water bottle cage with a spare tube strapped to our frame using a OneUp Gear Strap, just in case you can't fix a puncture with your tubeless plugs. This leaves your pockets free for keys, phone and snacks.\u003c\/p\u003e\u003cp\u003eFor rides over 3 hours, we add a fanny pack or small backpack so that we can pack more food and water, a jacket, a merino base-layer and a basic first aid kit.\u003c\/p\u003e\u003cp\u003eA small backpack weighs around 1.5lbs (680g) completely empty. That's the weight difference between a carbon and an aluminium frame.\u003c\/p\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":41113459982381,"sku":"10010506","price":89.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_Multi_Tool_V2_Black_01_d622f8c0-9369-4364-8b6b-3a719221a383.jpg?v=1662678302"},{"product_id":"oneup-components-edc-v2-chainbreaker-kit-black","title":"OneUp Components EDC V2 Chainbreaker Kit - Black","description":"\u003cp\u003eIf you've already got the EDC V2 Carrier and a multitool this little kit adds chainbreaker functionality to prevent you being starnded with a busted chain.\u003c\/p\u003e\u003cp\u003eThe EDC Tool Chainbreaker Kit includes the chainbreaker and bolt to attach to the EDC storage carrier.\u003c\/p\u003e\u003cp\u003eKit Contains:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eChainbreaker\u003c\/li\u003e\n\u003cli\u003eSpare Bolt\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":41267983974445,"sku":"10019664","price":39.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/products\/OneUp_Components_EDC_V2_Chainbreaker.jpg?v=1665968158"},{"product_id":"oneup-components-edc-every-day-carry-tool-frame-kit-black","title":"OneUp Components EDC Every Day Carry Tool Frame Kit - Black","description":"\u003cspan data-mce-fragment=\"1\"\u003eThe OneUp Components EDC Every Day Carry Tool Frame Kit includes the tool carrier plastic parts, tyre lever and storage capsule.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWho's this item for:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e Anyone with an EDC Tool kit that wants or needs to replace some worn parts of it. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eWhat does it include:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTyre Lever\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSealed C02 storage capsule\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStorage carrier for tool and quick links\u003c\/li\u003e\n\u003c\/ul\u003e\u003cb data-mce-fragment=\"1\"\u003ePros:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e Direct replacement from OneUp. \u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003eCons:\u003c\/b\u003e\u003cspan data-mce-fragment=\"1\"\u003e No cons!\u003c\/span\u003e","brand":"OneUp Components","offers":[{"title":"Default Title","offer_id":42126038564909,"sku":"10006817","price":19.95,"currency_code":"AUD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0575\/7052\/5229\/files\/OneUp_Components_EDC_Every_Day_Carry_Tool_Frame_Kit_01.jpg?v=1707864541"}],"url":"https:\/\/www.mtbdirect.com.au\/collections\/oneup-components-bike-mounted-multi-tools.oembed","provider":"MTB Direct Australia","version":"1.0","type":"link"}