BikeYoke Reverb DeHy Basic Adaptor Kit
Our DeHy Basic kit allows you to optimise ergonomics and reliability of your Reverb Stealth, by replacing the bulky original hydraulic remote with a wire-actuating Remote lever, such as our BikeYoke Triggy.
Installation is fairly easy, since it does not require any opening of the post´s internal hydraulics. You simply need to take off the original hydraulic hose and replace the lower unit with our DeHy assembly and install the shift cable and remote for actuation. You should be able to do that in least than 10 minutes.
Another benefit is the availability and pricing of spare parts. In case of a damaged or ripped cable after a crash, you can easily find a shift cable and outer housing in basically any local bike shop nearby, whereas it is going to be hard to find immediate replacement of the original hydraulic hose and fittings.
Compared to the original "Connectamajig" quick-connect hose, our DeHy saves quite some build height, which can be very useful in many cases to get some extra seat post insertion into the seat tube.
You will never have to bleed you original hydraulic remote hose again, once you go by wire actuation.
DeHy Basic contains:
1x full CNC aluminium DeHy assembly unit for Reverb Stealth
1x outer housing 1500mm
1x inner cable 1700mm
2x endcap for outer housing
1x squeeze endcap for inner cable
1x barrel cable clamp for inner wire
Please note the DeHy Basic kits do NOT include a remote.
The DeHy Basic kit is available in 2 versions:
Suit Reverb A1 / A2 (before late 2016. The slider will be ALL black with not logo on it)
Suit Reverb B1 (after late 2016. The slider will have ROCKSHOX laser etched onto it about 10-20mm from the top.
Installation manual is the last photo.
|BikeYoke Reverb DeHy Basic Adaptor Kit||BKYKDEHYKIT|
|Suit Reverb A1-A2||4713291520152|
|Suit Reverb B1||4713291520169|
|Suit Reverb C1||4713291521852|